Vont Scope Bike Light Product Manual

Scope Bike Light

Model No. VNT-BL01	IP Rating IPX4 waterproof, IP44 dustproof
Power Source Front: 3 AAA batteries (not included) Rear: Pre-installed CR2032 batteries	Light Modes Front: Low, high, and strobe Rear: Constant, fast strobe, and slow strobe
Battery Life Front: 4 to 6 hours Rear: Up to 12 hours (continuous use)	Product Dimensions Diameter: 1.3 in Length: 4.09 in
Lumens Front: 300 lm, Rear: n/a	Product Weight Front: 4.27 g, Rear: 0.69 g

       

Front Bike Light

Power on/ switch mode - Press the power button located at the rear of the bike light repeatedly to turn on, or cycle through the 3 light modes (low, high, and strobe).

Adjust focus - Slide the head of the front bike light to shift light focus from floodlight to spotlight and vice versa.

 

 

 

 

Rear Bike Light

Power on/ switch mode - Press the power button repeatedly to turn on, or to cycle through the 3 light modes (constant, fast strobe, and slow strobe).

 

 

Installation

Attach the mounting bracket around the handlebar, then install the front light onto the mounting bracket and securely tighten the clamping knob.

 

For the rear light, wrap the strap around the seat post of the bike and hook the strap to the knob on the light to secure it.

 

 

Things to remember

	For ease of use, all light modes can be toggled using a single button.
	Bike lights come with mounting brackets that fit most bike handlebars/seat posts.
	Make sure to securely tighten the clamping knob/mounting bracket to avoid drops.
	Once the lights start to dim, please replace the batteries.
	Front light also functions as a flashlight without the mounting bracket.
	If you think you received a defective product, send us an e-mail at [e-mail].

Got more questions? Email us at [e-mail]