Solar Flagpole Light
|
Model No. VNT-SF01 |
Light Temperature Cool White |
|
Power Source 3 pre-installed AA batteries; solar panel |
Lumens 200 lm |
|
Battery Life Up to 10 hours on full charge |
Number of LEDs 26 |
|
Product Weight 16 oz |
IP Rating IP65 |
|
Product Dimensions Diameter: 8.66 in Hole diameter: 0.55 in |
Solar Flagpole Light ABCs
To install – Unscrew the ball shaft of your flagpole, insert the flagpole light, and put the ball shaft back.
To turn on – Full press the power button (located at the bottom) once before attaching it to the flagpole.
Operation – Automatically turns on when darkness is detected, and powers off when darkness fades.
Things to remember
 |
Ball ornament, pole, and pulley assembly are not included in the package. |
 |
Ball ornament must have a threaded rod with 0.5" in diameter and a minimum length of 1.5". |
 |
Fits trucks and top caps of standard US flagpoles. |
 |
Take off the plastic film on solar panels before using. |
 |
Bask the light under direct sunlight to make sure it gets enough charge. |
 |
The device will only light up once the sensors detect darkness. |
 |
If you think you received a defective product, send us an e-mail at support@vont.com. |
Got more questions? Email us at support@vont.com