Breeze Bike Light
IPX4 waterproof, IP44 dustproof
Built-in rechargeable battery
(Front: 1200 mAh, Rear: 650 mAh)
Front: 3.94 x 1.69 x 2.16 in
Rear: 1.37 x 1.57 in, Strap length: 2.8 in
Front: 6 hours on low setting, 3 hours on high setting
Rear: 10 hours (continuous use)
Front: 2.6 oz
Rear: 1.45 oz
Front: 250 lm, Rear: 40 lm
Up to 5.9 ft
Front Bike Light
Power on/ switch mode - Press the power button located at the top of the bike light repeatedly to cycle through the 3 light modes (High, low, strobe).
Rear Bike Light
Power on/ switch mode - Press the power button repeatedly to cycle through the 4 light modes (High, low, slow strobe, fast strobe).
Wrap the strap around the seat post or handlebar of the bike and hook the strap to the knob on the light to secure it.
1. Use your finger to open the water-resistant flap to reveal the USB charging slot. It is located on the back of the front bike light and at the top of the rear bike light.
2. Plug the USB charger into the slot.
Charging - Red indicator lights will light up on the devices to indicate they are charging.
Fully Charged - Green indicator lights will light up on the devices to indicate they are fully charged.
It takes around 2 to 3 hours for the devices to fully charge.
Things to remember
|For ease of use, all lights modes can be toggled using a single button.|
|The strap fits bike handlebars/ seat posts of up to 177 in diameter.|
|Fully charge the device first to maximize hours of use.|
Once the indicator light starts to blink on the front light, please charge the device immediately.
|Front light can still be used while charging via a portable power bank.|
|If you think you received a defective product, send us an e-mail at firstname.lastname@example.org.|
Got more questions? Email us at email@example.com